|
| Model Number: | JC3248R028N |
| MOQ: | 50PCS |
| Price: | ￥45/PCS |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 5000PCS/day |
2.8 inch Without touch 240*320 2.8" TFT LCD Module Screen Display ILI9341 Controller for Arduino UNO MEGA2560 Board
Provide 51 MCU, stm32 MCU, Arduino sample program
Type: touch panel
Size: 2.8 "parallel port
Display area: 43.2*57.6(mm)
Driving element: a-Si TFT active matrix
Pixel arrangement: RGB vertical stripes
Drive IC: ILI9341
Backlight: white LED
Viewing direction: 6 o'clock
Color depth: 262K/65K
Resolution (points): 240RGB * 320 points
5V compatible, used with 3.3V or 5V logic
At least 4 IOs are required for MCU
With PCB board (including power supply IC and SD)
1 * 2.8 inch TFT LCD display
| Name | Parameter |
| SKU | JC3248R028N |
| Display Color | RGB 65K color |
| Touch mode | Without touch |
| Screen Size | 2.8(inch) |
| Type | TFT |
| Driver IC | ILI9341 |
| Resolution | 320*240 (Pixel) |
| Module Interface | 8-bit parallel interface |
| Active Area | 43.2*57.6(mm) |
| Module PCB Size | 52.70*78.22(mm) |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| Operating Voltage | 5V/3.3V |
| Power Consumption | TBD |
| Product Weight(Package containing) | 44(g) |
| Number | Pin Label | Pin Description |
| 1 | LCD_RST | LCD bus reset signal, low level reset |
| 2 | LCD_CS | LCD bus chip select signal, low level enable |
| 3 | LCD_RS | low level: command, high level: data |
| 4 | LCD_WR | LCD bus write signal |
| 5 | LCD_RD | LCD bus read signal |
| 6 | GND | Power ground |
| 7 | 5V | 5V power input |
| 8 | 3V3 | 3.3V power input, this pin can be disconnected |
| 9 | LCD_D0 | LCD 8-bit data Bit0 |
| 10 | LCD_D1 | LCD 8-bit data Bit1 |
| 11 | LCD_D2 | LCD 8-bit data Bit2 |
| 12 | LCD_D3 | LCD 8-bit data Bit3 |
| 13 | LCD_D4 | LCD 8-bit data Bit4 |
| 14 | LCD_D5 | LCD 8-bit data Bit5 |
| 15 | LCD_D6 | LCD 8-bit data Bit6 |
| 16 | LCD_D7 | LCD 8-bit data Bit7 |
| 17 | SD_SS | SD card SPI bus chip select signal, low level enable |
| 18 | SD_DI | SD card SPI bus MOSI signal |
| 19 | SD_DO | SD card SPI bus MISO signal |
| 20 | SD_SCK | SD card SPI bus clock signal |
